Хорошо. Детально работает так.
Pressure/retraction control during ACS mode
• The pressure/retraction of the 1st image transfer roller is controlled by the number of
multiple copies for the monochrome original during multi-copy cycle, so it promotes the
high productivity and extends the consumables’ life.
* ACS: Auto color selection
• The 1st image transfer roller/Y, M, C is pressed against the transfer belt when the roller is
in its default position.
A. Operation
• ACS control starts counting the number of multi-copies of the monochrome original when
switched from the color original to the monochrome original.
• When the number of multi-copies is as specified or under
: The monochrome printing will start with color mode. (with the 1st image transfer roller /
Y/M/C being pressed)
IU (Y/M/C) does not develop or transfer the image, but it rotates when the pressed
transfer belt rotates.
The transfer belt being pressed saves time since the 1st image transfer roller does not
need to be retracted.
• When the number of multi-copies is as specified or over.
: The monochrome printing will start when the color mode is complete and the 1st image
transfer roller /Y/M/C is retracted to be switched to the monochrome mode.
The transfer belt being retracted prevents IU to be wasted by useless rotation.
• ACS control system starts operating only after detecting the number of monochrome
originals that will be printed consecutively during a multi-print cycle.
Since on the first copy, the control can be performed only for where the original is read
and counted.
The ACS control performs effectively for the print jobs as listed below.
For the 2nd set of prints onward in electronic sorting
printing using job programs
B. bizhub C353 ACS control criteria
• Number of multiple copies of monochrome original when paper feed speed is 166.6 mm/
s.
Дальше таблички, через сколько страниц он переключится в монохром и через сколько страниц из него выйдет.
Еще дальше установки свитчей. Всё.
Для 451/550/650 аналогично.
Но смысл в том, что есть цена переключения в страницах - он будет выходить из монохрома от 2 (A3) до 4 (A4) страниц.
Мне например надо было недавно напечатать черные плашки с небольшим количеством белых букв.
Попробовал монохром - хорошая плашка, но матовая.
Цвет, чёрный композитом - блестит, глубокий чёрный.
Клиент согласился на дорогой вариант.
А если бы умный аппарат за меня решил - монохром?
Красить в приложении? А в офисных приложениях из каких соображений ему исходить? R125 G125 B125 - это серый?
|