SERVICE REQ. 0001001B
Error meaning:
Head driver (TG) temperature error
Explanation
During printing operation (empty jetting of ink), there may be a case where
the temperature inside the Print Head has risen above the specified value
and the thermistor in the Print Head detects it as abnormal temperature. In
such a case, this message is displayed and the printer stops operating.
Cause of trouble
Print Heat increase due to empty jetting of ink
Faulty contact of Head FFC, broken Head FFC or disconnected Head
FFC.
Print Head broken down.
Remedy
1. Turn off the power to the printer once and turn it on again and check for
recovery.
2. If the same error occurs immediately, replace the Printhead (p.280)
|