[Сталкер]

Говорите прошло 50 000, а блоки цветные меняли? дурит желтый блок

коды Р-8 "Yellow Imaging Unit failure" причина All density readings taken from the density pattern produced on the Transfer Belt are 0.5 g/m2 (IDC Sensor
photoreceiver output) or less during max. density
adjustment (Vg/Vdc adjustment). • All density readings taken from the density pattern produced on the Transfer Belt are 4.5 g/m2 (IDC Sensor
Photoreceiver output) or more during max. density
adjustment (Vg/Vdc adjustment.)и
Р-21 из той же оперы "Color Shift Test Pattern failure" причина "The number of points detected in the main scan direction
is more or less than the specified value during
main scan direction registration correction.
• The number of points detected in the Sub Scan Direction
is more or less than the specified value during sub
scan direction registration correction."
Но прежде чем что-то серьезно рыть, я бы блоки цветные поменял.