KM Bizhub C6000L + Canon C5030

[Cheetah]

В проходном месте — только латекс!
И обязательно с консумацией!

[ILIAS]

Сообщение от Cheetah

В проходном месте — только латекс!
И обязательно с консумацией!

Сейчас насоветуют. Ллатекс с консумацией надо делать в глубоком подполье, с хорошей "крышей".

[Виталий С.]

Сообщение от ILIAS

Сейчас насоветуют. Ллатекс с консумацией надо делать в глубоком подполье, с хорошей "крышей".

ИМХО даже это не сделает его рентабельным... пока ченить новое не придумают... Вон эпсон (правильнее написать Мимаки - отпечатался)уже на пьезаструйных головах латекс анонсировал... А термоголовки от HP которые надо менять каждые 3-6 литров краски это никакая консультация в прибыль не вытянет...

[Виталий С.]

Артём1987,
Сколько стоит HP и литр краски на него? Уже задавал вопрос.. все жду ответа...

[ILIAS]

Это не важно, консумация дороже.
Без консумации только сольвент идет и только большими дозами.

[brosko]

и где же этот анонс латекса от епсон?

[Виталий С.]

New Mimaki latex ink
Mimaki’s latex ink delivers significant advantages over alternative solutions – requiring a very low heat to cure, opening up more materials, consuming substantially less energy and therefore minimising running costs. It is also the first latex solution to offer a white ink – which sits along side six process colours with a vibrant yield and extended gamut. The Mimaki latex inks are quick drying and supplied in 600cc ink packs which when used in conjunction with Mimaki’s eco-cases reduce waste and allow for long unattended print runs.

The 1.3m and 1.6m wide Mimaki JV400-LX printers feature a unique piezo print head, offering the usual advantages over alternative technologies – no requirement for frequent user head replacement, a stunning 4 picolitre dot size along with variable dot technology. The use of piezo heads further supports Mimaki’s environmental and sustainability credentials, with waste minimised and quality maintained throughout the printhead’s life. The Mimaki latex ink is an aqueous, resin based technology with proven eco friendly qualities and zero odour, making the machines ideal for installation in shops, education establishments and office spaces – as well as traditional print companies and graphics setups.

Pre, print and post heaters typically running below 60°C in combination with built in drying fans aid the fast curing of the Mimaki latex ink. With no gassing off required; any post print lamination can take place immediately, shortening ‘total job time’ and enabling print suppliers to respond to short lead times. Coupled to Mimaki’s class leading print speeds – up to 18m2 / hour at 900 x 900dpi – the JV400-LX range delivers a compelling solution across a broad range of applications.

http://www.hybridservices.co.uk/Prod...e-uv-inks.html

New super durable UV ink

Available soon after the Mimaki latex range and utilising the same impressive print engine is Mimaki’s unique SUV ink set. Combining the flexibility of solvent with the durability of UV cured inks, the newly developed ink delivers a smooth, glossy result which is incredibly durable and vibrant. Featuring on the new Mimaki JV400-130SUV and 160SUV models, the same headline speeds of 18m2 / hour and high print quality as the latex models remain. The exceptionally high durability comes from the unique ink recipe – with components of the ink keying to the ink-receiving layer of the media. The surface of the ink is then cured using a UV process which results in a vibrant, durable and flexible finish making it ideal for banner production, pull ups and display materials – or any application where a combination of vibrant colour and a long lasting, scratch resistant print is important.-

[brosko]

а причем тут епсон?

[Виталий С.]

Опечатка

[сч]

Сообщение от Виталий С.

Mimaki

Сообщение от brosko

епсон

Ни одной буквы не совпало. действительно оЧепятка))